ZINC RICH / ZINC PHOSPHATE EPOXY PRIMER

Two component air drying Polyamide cured zinc rich / Zinc phosphate Epoxy primer. Recommended as a primer for suitably cleaned MS, GI, Aluminium surface in OEM equipment painting as well as an anti-corrosive primer within Commercial Complexes, High-Rise & Low-Rise Structures, Hotels, Hospitals, Power Plants, Steel Plants, Fertilizer Plants, Refineries & Petrochemical Complexes for protection of steel structures, pipelines, equipment, etc from corrosion. Also, the primer withstands high chemical resistance and it is recommended for highly saline atmospheres.

KEY FEATURES:

Colour Grey / Red Oxide

Matt Finish

VOS 65% ± 5%

Coverage 4.5 SQM / ltr ± 10% at recommended DFT of 75μ.

Surface dry: 20-30 Minutes / Hard dry: 24 Hours / Full cure: 7 Days
(At 30 degree C and 60% Relative humidity)

Reduces Fitting Time by 25%

Shelf Life 9 months in seal packed & prescribed storage conditions

Mixing Ratio - Base: 3 Hardener: 1

Application By Brush / Air spray / Airless spray